Manual Tuning - - Front Panel Controls - Panasonic TX-28DT30 Operating Instructions Manual

MANUAL TUNING - - FRONT PANEL CONTROLS

Manual tuning of the analogue programme positions is available from the front panel controls
The Front panel controls are located
under the flap on the front of the TV.
Select an existing analogue
programme position
Press the F button repeatedly until
"Tuning mode" is reached
Press the -- or + button to access
Tuning mode. The next available
programme position at the end of
the current list will be selected.
Press - - or + to begin searching for
stations
The television will begin to search for
stations. When a station is found the
search will pause; if it is not the correct
station, you can press the - - or +
buttons to continue searching.
When the desired station is found,
press the TV/AV button to move to
the programme position indicator
Press - - or + to select the
programme position in which the
station is to be stored
Press STR to store the programme
position
The programme position and channel
number indicators will flash to indicate
the station is being stored
To tune further stations press the
TV/AV button and repeat the tuning
process
To exit Manual Tuning, press the F
button
F
--/v
--/v
--/v
Important note :
TV/AV
On passing channel 68, tuning will restart at channel 21.
--/v
STR
58
21 68
25