CyberData 10844 Operation Manual page 30

24 Installing the VoIP Ceiling Speaker
Restore the Factory Default Settings
Parameter
Default Gateway
To restore these parameters to the factory default settings:
CyberData Corporation
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
1. Press and hold the RTFM switch for 20 seconds.
2. The speaker will beep after one second. Continue to hold the switch until the speaker beeps
again after 20 seconds.
3. Release the switch. The following occurs:
• A voice message announces that the factory default settings are being restored.
• Once the settings are restored, a voice message announces the restored default IP address:
192.168.3.10
• A voice message announces that the speaker is rebooting.
• The speaker reboots.
Table 2-10. Factory Default Settings
Factory Default Setting
192.168.3.1
930095K Operations Guide