Major Operating Controls And Their Functions - Panasonic WV-CM1020 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

POWER INPUT
A
ON
OFF
B
q w e
q Power Switch (POWER, ON/OFF)
This is a push-push type switch which turns the power
of this monitor on and off.
Press once (switch remains down (;)) to turn on the
power of the monitor.
Press again (switch comes up (l)) to turn off the
power of the monitor.
Note: There may be a delay of several seconds until
the monitor display comes on.
w Power Indicator
Is on when the monitor's power is turned on.
e Input Signal Select Switch (INPUT A/B)
This is a push-push type switch which selects the sig-
nal input A or B.
Press once (switch remains down (;)) to select the
INPUT B signal.
Press again (switch comes up (l)) to select the
INPUT A signal.
r Menu Button (MENU)
Press to display the setup menu.
t Cursor Buttons (D, C)
Press these buttons to select a parameter by moving
the cursor up or down in the parameter rows.
5
Video Monitor WV-CM
AUDIO
MENU – +
r t y
FOCUS
VIDEO B VIDEO A
IN IN
OUT OUT
u i !3 !4 !2 !1
y Increment/Decrement Buttons (AUDIO –, +)
• Setup screen adjustment (Menu displayed)
Press these buttons to adjust the level of an item
selected in the setup menu.
Note: If you select NORMAL SETTINGS in the Setup
menu, and press the Increment/Decrement button
(–) or (+), all menu parameters will be restored to
the factory default settings.
• Audio adjustment (Menu not displayed)
Press these buttons to increase or decrease the sound
volume.
u Focus Control (FOCUS)
This control adjusts the screen focus.
i Screen Control
This control is preset at the factory.
o Audio Input Connector (AUDIO IN)
For input of audio signal from an outboard device.
!0 Audio Output Connector (AUDIO OUT)
The audio input signal connected to the audio input
connector o is looped through to this connector.
AUDIO
IN
AC IN
OUT
!0 o !5