Advanced Control Operation - Panasonic WV-CM1020 Operating Instructions Manual

ADVANCED CONTROL OPERATION

Displaying the Setup Menu
1. Press the power switch once (switch remains down (;)) to turn on the power of the monitor.
2. Power Indicator is on.
3. Select the input channel by pressing the input signal select switch.
Press the MENU button to open the setup menu.
It will close automatically if no operation takes place within about 3 seconds.
BRIGHT
CONTRAST
PICTURE
COLOUR
AFC
LANGUAGE
Adjustment
4. Move the cursor to LANGUAGE by pressing the (D) or (C) button.
5. Select the desired LANGUAGE parameter by pressing the (–) or (+) button. Pressing the button will toggle the language of
the setup menu as shown below.
ENGLISH
6. Move the cursor to BRIGHT, CONTRAST, PICTURE, COLOUR or AFC by pressing the (D) or (C) button, then adjust the
level of the selected item by pressing the (–) or (+) button.
While the level of an item is being adjusted, the indicator displays the changed level as shown below.
Item
BRIGHT
CONTRAST
PICTURE
COLOUR
AFC
8
0
0
0
0
SHORT
ENGLISH
NORMAL SETTINGS
FRANÇAIS
+
–
Effect
Darker Brighter
Less More
Soft Sharp
Less More
Short Long
DEUTSCH
Indicator
BRIGHT
CONTRAST
PICTURE
COLOUR
20
20
20
20