Major Operating Controls And Their Functions - Panasonic WV-CM1480 Service Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Front View
INPUT
POWER
STANDBY SELECT
AUDIO
–
MENU
ON
OFF
q w e r t y u
* The above figures represent model WV-CM2080.
q Power Button (POWER ON/OFF)
This button turns the power of the monitor on and off.
w Power Indicator
This indicator is on when the power of the monitor is
turned on, also in standby mode.
On: Green light
Standby: Orange light
e Standby Button (STANDBY)
Pressing this button toggles the display mode on the
monitor screen as shown below.
On: Normal display
Standby (Mode 1): Low display brightness
Standby (Mode 2): No display (blackout)
r Input Selection Button (INPUT SELECT)
Selects input in the sequence shown below.
VIDEO IN A VIDEO IN B
t Menu Button (MENU)
Pressing this button opens the Display Setting menu for
changing the monitor's display settings.
Pressing this button for 5 seconds or more opens the
COMMUNICATION SETUP menu.
Video Monitor WV-CM
+
S-VIDEO IN
Rear View
2080
y Direction Buttons (C, D)
These buttons move the cursor to the item parameters
in the Display Setting and Setup menus.
C: Down
D: Up
u Decrement/Increment Buttons (AUDIO -, +)
Press these buttons to increase or decrease the audio
volume.
These buttons also select the item parameter or level in
the Display Setting and Setup menu.
!1 Focus Control (FOCUS)
This control adjusts the screen focus.
!2 Screen Control
This control is preset at the factory.
!3 Data Ports (DATA)
These ports are used to exchange control data with the
System Controller in Panasonic Security Data mode.
!4 Data Termination Selector
(TERMINATION ON/OFF)
This selector is used to enable termination of the moni-
tor's data port.
– 1 –
VIDEO
FOCUS
B A
AUDIO
IN IN
B A
IN IN
STANDBY
DATA S-VIDEO
ON
STANDBY
OFF
G
P S · D a t a
IN OUT OUT
OUT OUT
ON OFF
TERMINATION
!7 !8
!1 !2 !3 !4 !5 !6 @0 !9
AC IN
@1