Major Operating Controls And Their Functions - Panasonic WV-CM1020 Service Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

POWER INPUT
A MENU
ON
OFF
B
q w e r t
q Power Switch (POWER, ON/OFF)
This is a push-push type switch which turns the power of
this monitor on and off.
Press once (switch remains down (;)) to turn on the
power of the monitor.
Press again (switch comes up (l)) to turn off the power
of the monitor.
Note: There may be a delay of several seconds until the
monitor display comes on.
w Power Indicator
This Indicator is on when the monitor's power is turned
on.
e Input Signal Select Switch (INPUT A/B)
This is a push-push type switch which selects the signal
input A or B.
Press once (switch remains down (;)) to select the
INPUT B signal.
Press again (switch comes up (l)) to select the INPUT
A signal.
r Menu Button (MENU)
Press to display the setup menu.
t Cursor Buttons (D, C)
Press these buttons to select a parameter by moving the
cursor up or down in the parameter rows.
y Increment/Decrement Buttons (AUDIO –, +)
• Setup screen adjustment (Menu displayed)
Press these buttons to adjust the level of an item select-
ed in the setup menu.
Note: If you select NORMAL SETTINGS in the Setup
menu, and press the Increment/Decrement button
(–) or (+), all menu parameters will be restored to
the factory default settings.
• Audio adjustment (Menu not displayed)
Press these buttons to increase or decrease the sound
volume.
Video Monitor WV-CM
AUDIO
– +
y
FOCUS
VIDEO B
IN
OUT
u i !3 !4
u Focus Control (FOCUS)
This control adjusts the screen focus.
i Screen Control
This control is preset at the factory.
o Audio Input Connector (AUDIO IN)
For input of audio signal from an outboard device.
!0 Audio Output Connector (AUDIO OUT)
The audio input signal connected to the audio input con-
nector o is looped through to this connector.
!1 Video A input Connector (VIDEO A IN)
For input of the PAL composite video signal from an out-
board device.
!2 Video A output Connector (VIDEO A OUT)
The video input signal connected to the video input con-
nector !1 is looped through to this connector and termi-
nated automatically.
!3 Video B input Connector (VIDEO B IN)
For input of the PAL composite video signal from an out-
board device.
!4 Video B output Connector (VIDEO B OUT)
The video input signal connected to the video input con-
nector !3 is looped through to this connector and termi-
nated automatically.
!5 AC Connector (AC IN)
Connector for AC power supply cord.
– 1 –
VIDEO A AUDIO
IN IN
AC IN
OUT OUT
!2 !1 !0 o !5