Major Operating Controls And Their Functions - Panasonic GP-RV700 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Front View
q
STD BY/ON
CONTRAST
w
BRIGHT
e
AUDIO
r
MIN MAX
q Mode Selector (STD BY/ON)
Toggles the operation mode standby and on.
STD BY: No image is on the monitor but the picture
tube is preheated on standby.
The indicator is lit green while this mode is select-
ed.
ON: Displays camera images on the monitor.
The indicator is lit amber while this mode is select-
ed.
w Contrast Control (CONTRAST)
Adjusts the picture contrast. Turn this control clockwise
to increase the picture contrast, and turning the control
counterclockwise has the reverse effect.
e Brightness Control (BRIGHT)
Adjusts the picture brightness. Turn this control clock-
wise to increase the picture brightness, and turning the
control counterclockwise has the reverse effect.
r Audio Control (AUDIO)
Adjusts the volume. Turn this control clockwise to
increase the volume, and turning the control counter-
clockwise has the reverse effect.
5
Rear View
y
CAUTION
ABC
FOCUS
u
!1
t
t Auto Brightness Control Sensor (ABC)
This sensor detects illumination intensity.
y Monitor Fixing Screws
These four screws are used to secure the monitor. The
monitor can be tilted approximate 30 degrees by loos-
ing these screws.
u Mounting Bracket
Installs the monitor to a vehicle.
!1 Focus Control (FOCUS)
This control is preset at the factory.
!2 Remote/Camera Connector (REMOTE/CAMERA)
This 9-pin connector is used to connect the remote
cable assembly supplied as an accessory for supplying
the power and connecting the camera.
. . . . . .
THIS DEVICE THIS CLASS
REMOTE
CAMERA
SER.
NO.
!2