Major Operating Controls And Their Functions - Panasonic WV-CM1470 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

FRONT VIEW
q Power Switch (POWER)
This switch turns the power of the monitor on and off.
Press this switch once. The switch remains down (;)
for turning on the power of the monitor.
Press again. The switch comes up (l) for turning off
the power of the monitor.
w Power Indicator
e Input Signal Selection Switch (INPUT, A/B)
This selector is used to select the desired channel to
be monitored.
Press this switch once. The switch remains down (;)
to enable to monitor the picture from INPUT B (video
signal/S-video signal and audio signal).
Press again. The switch comes up (l) to enable to
monitor the picture from INPUT A (video signal and
audio signal).
r Input Signal for INPUT B Selection Switch
(S-VIDEO/ VIDEO)
This selector is used to select the video signal for
INPUT B.
Press this switch once. The switch remains down (;)
for selecting S-video signal and audio signal.
Press again. The switch comes up (l) for selecting
video signal and audio signal.
POWER
PUSH
ON
OFF
B S-VIDEO LONG
A VIDEO SHORT
COLOUR
INPUT AFC
Colour Monitor WV-CM
MIN MAX
BRIGHT PICTURE AUDIO
CONTRAST
t AFC Time Selection Switch (AFC, LONG/SHORT)
This switch is used to select the AFC time.
Select LONG when the video signal is jittery.
Select SHORT when video signal is standard and nor-
mal.
Press this switch once. The switch remains down (;)
for selecting LONG.
Press again. The switch comes up (l) for selecting
SHORT.
y Colour Control (COLOUR)
Turn this control clockwise to strengthen the picture
colour.
Turn this control counterclockwise to weaken the pic-
ture colour.
u Colour Sub Control
i Bright Control (BRIGHT)
Turn this control clockwise to increase the picture
brightness.
Turn this control counterclockwise to decrease the pic-
ture brightness.
o Bright Sub Control
-2-
1470