Installation and Setup
Completing the Installation
Step 10. Reinstalling the Turret and the Dome Bubble
30
Restoring Factory Defaults
Your camera has a Factory Reset button located inside the camera (see
button to restore your camera options and passwords to their default settings. Use a pin or
straightened paperclip to press and hold the Reset button for five seconds.
When you have set up your camera and completed the network connections:
1.
Align the turret on the gimbal assembly, then gently press the turret until in clicks
securely into place.
2.
Align the dome bubble captive screws with the mounting holes in the enclosure base,
then securely screw them into place.
Figure 2-12
Reassembled HD4 EQUIP Series Dome Camera
Figure
). Use this