Figure 4-1 Launching The Web Client From The Ip Utility - Honeywell EQUIP HD4HDIH User Manual

Enable HTTP
Server must be
enabled. If it isn't,
the Launch
Browser button
might not be
available.
Document 800-07496V2 Rev A
11/2011
HD4 EQUIP Series True Day/Night Rugged IP Network Camera User Guide
5. In the Discovery pane, double-click the device to which you want to connect.
-OR-
Select the device and click Connect
The network settings for the connected device are displayed in the System pane.
6. Click Launch Browser (see
Figure 4-1 Launching the Web Client from the IP Utility
Note If the Launch Browser button is inactive, then you must enable Enable HTTP
Server. Click to enable the HTTP Server, and then click Apply. The Launch
Browser button should then be enabled.
Note All examples in this User Guide show the GUI for the HD4MDIH model
camera, unless otherwise specified.
.
Figure 4-1) to go to the web client logon page.
Connect to the device then click
Launch Browser
47