Installation and Setup
Equipment Required
Overview of the Installation Procedure
18
If any parts are missing or damaged, contact the dealer you purchased the camera from or
call Honeywell Customer Service (see
The following tools might help you to complete the installation:
•
Drill
•
Screwdrivers
•
Wire cutters
Note
Please familiarize yourself with the installation procedure and complete each
step in the exact sequence given.
The initial installation of your HD4 series camera consists of the following steps:
Table 2-1
Steps for Installing your Camera
Step
1
Remove the dome bubble and the turret.
2
Remove the gimbal.
3
Prepare the mounting surface.
4
Install the conduit plug.
5
Install the grommet (if required).
6
Mount the camera.
7
Connect the wiring.
8
Seal the wiring.
9
Adjust the camera.
10
Reinstall the dome bubble and turret.
Warranty and Service
on page 13).
See ...
page 20
page 20
page 21
page 22
page 22
page 23
page 23
page 27
page 27
page 30