IP Camera Web Client
User Profiles
Logging On and Off the IP Web Client
Launching the Web Client from IP Utility
46
Table 4-1
describes the roles and privileges for the web client application users:
Table 4-1
User Roles and Privileges
User Role
User Name
Administrator
admin
Guest
guest
Operator
There are two ways to open each IP web client.
•
By clicking Launch Browser from the IP Utility interface.
•
Directly from Internet Explorer by entering the URL (the IP address) in the address
bar.
1.
From the desktop, double-click the Honeywell IP Utility icon
-OR-
Click Start
All Programs
IP Utility.
The Honeywell IP Utility Log On window opens.
2.
From the User Name drop-down list, select Administrator or Guest.
See
Table 4-1
on
page 46
3.
In the Password field, enter the case-sensitive password.
•
The default Administrator password is 1234.
Only one Administrator can be logged in at a time.
•
The default Guest password is guest.
4.
Click
.
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
Privileges
• View video and network settings
• Configure the alarm and audio settings
• Set up the video compression settings
• Configure auto exposure and white balance for
the camera
• Set up camera sabotage and video motion
detection settings
• View video
Honeywell Video Systems
for User roles and privileges.
.
IP Utility
Honeywell