Ip Camera Web Client; Overview - Honeywell EQUIP HD4HDIH User Manual

IP Camera Web Client

Overview

Document 800-07496V2 Rev A
11/2011
Before you launch the Honeywell IP web client, ensure that you complete the following
sections before configuring your HD4 series camera:
• Chapter 2, Installation and Setup
• Chapter 3, Installing the Honeywell IP Utility and Web Client Software
This chapter covers:
• Navigating the web client interface
• Understanding the web client features and functions
• Configuring compression settings
• Configuring camera settings
• Setting tamper detection
• Configuring audio, alarm, and motion detection settings
The network camera web client is a web-based application that enables you to view video,
listen to audio, and configure camera, sabotage detection, motion detection, alarm, and
audio settings for the network camera.
Certain features of the IP Camera web client are user-based and are available only to the
Administrator. Guest users are limited to the Live View tab.
4
45