Camera Setup; Auto Exposure; Figure 4-12 Camera Setup - Honeywell EQUIP HD4HDIH User Manual

IP Camera Web Client

Camera Setup

Auto Exposure

58
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
The Camera Setup view provides access to the settings used to configure the camera
configurations for both Primary and Secondary streams. The following section explains
Auto Exposure and White Balance setup.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Figure 4-12 Camera Setup
The Auto Exposure settings allow the user to access and configure exposure-related
settings as described in Table 4-5.