Scanning An Image; Reading The Documentation - Microtek ScanMaker V6UPL Installation Manual

USB Installation on the PC

4. Scanning an image

1. Place the image to be scanned on your scanner.
2. Press the scanner' s "Go" button, or double-click
the ScanWizard 5 icon on the desktop to launch
ScanWizard 5.
3. When ScanWizard 5 launches, it automatically
performs a fast preview of the material on your
scan bed and displays it in the preview area.
4. In the preview window, you can resize the
floating dotted line around the image by
dragging on the edge or corner of the scan
frame to determine the final size of the actual
scan.
5. To make adjustments to the image, use the tool
buttons. To scan the image, click the Scan to
button. The image is then scanned and saved to
a file. Aside from saving, you may also deliver the
saved image to an image-editing software, an e-
mail editor, or a web browser.
Save the scanned image to a
file, or deliver it to an image-
editing program, an e-mail
editor, or a web browser.
Resize dotted line for size of
the actual scan
"Go" button
Click on this button
to switch to the
Advanced Control
Panel window
Click here to
exit ScanWizard 5
Tool
buttons
for
image
settings
5. Reading the
documentation
1. Insert the Microtek CD-ROM into your CD-
ROM drive.
2. When the Microtek Software Installer comes up
on your screen, click the Manual button that
corresponds to the manual you wish to read.
This will launch Adobe Acrobat Reader, and you
can then read or print the manual.
4