Connect Power - Microtek ScanMaker V6UPL Installation Manual

Hide thumbs Also See for ScanMaker V6UPL:

Table of Contents

USB Installation on the PC

3. Connect power

1. Turn off your computer.

2. Plug the power adapter into the back of the

scanner, and plug the other end into a wall outlet

or power source. Make sure no other cable is

connected to the scanner except the power

adapter at this point.

This will turn on the scanner. The green light on

the front of the scanner will blink for a few

seconds and then stay on solid.

3. Connect one end of the USB cable to your

computer, and connect the other end of the

cable to the scanner' s USB port.

4. Turn on your computer. The system will find

your scanner automatically.

Table of Contents

Do you have a question about the ScanMaker V6UPL and is the answer not in the manual?