Konica Minolta BIZHUB PRO 1050p User Manual page 462

14
1
Click [Setting].
The SSL/TLS Setting screen appears.
Note
Initially [Request a Certificate] is checked.
Remove an already installed certificate first before requesting a new one.
For details, refer to "Removing a certificate" on page 14-49.
2
Click [Next].
3
Enter necessary information, and click [Next].
Following the screen indicating that the certificate is being requested,
another screen appears indicating the request has been completed.
4
Click [OK].
The Certificate Signing Request Data screen appears.
5
Click [Save].
The file will be saved.
6
Click [OK].
It will take you back to the SSL/TLS Information screen.
7
Check [Install a Certificate], and click [Next].
The certificate installation screen appears.
8
Enter the data of the certificate that you requested.
9
Click [Next].
10
The Encryption Strength Setting and the Mode using SSL/TLS screen
appears.
11
Enter discretionary settings, and click [Create].
Creation results appear.
12
Click [OK].
It will take you back to the SSL/TLS Information screen.
14-44
Browser Control Setting
bizhub PRO 1050P