Mfp Set; Proof-Print Hold Time - Konica Minolta BIZHUB 350 User Manual

Various settings
Note
To quit specifying the printer settings, touch [Enter] until the screen for
the Copy, Fax, Scan, or Box mode appears.
The default screens are shown below and each setting can be specified.
Basic Setting screen

MFP Set

!
Detail
For details on displaying the MFP Set screen, refer to "Printer settings"
on page 10-1.

Proof-Print Hold Time

The print data is deleted if the set time is not specified for printing the data.
You can specify to print data that is being held in 10, 20, or 30 minutes. (De-
fault setting: 10 min.)
% After changing the setting, touch [Enter].
200/250/350
Font screen
10
10-3