Konica Minolta BIZHUB 350 User Manual page 128

Setting up the PCL driver
3
Select the "User Authentication" check box, and then enter the user
name and password.
4
Click the [OK] button.
Note
If a print job is sent using a user name or password that is not a registered
account on this machine or if a job is sent without the "User Authentica-
tion" check box selected, this machine cannot authenticate the operation
and cannot print. When this occurs, the sent job is deleted.
When user authentication is specified on this machine and the Enhance
Security mode is enabled or when Access Lock is enabled on the soft-
ware DIP switch, the corresponding user may be locked out and denied
access if the authentication information is not entered correctly.
For details on user authentication and Enhance Security mode, refer to
User's Guide [Copy Operations].
!
Detail
For user authentication settings, consult the administrator of this ma-
chine.
200/250/350
5
5-15