Setting up network printing
4
Specify settings for the following:
–
Enable Windows Printing Service: Set whether to use the Windows
printing service. Select "Enable" here.
–
NetBIOS Name: Specify the NetBIOS name. Up to 15 of the follow-
ing alphanumeric characters and symbols can be used.
Uppercase and lowercase letters, numbers, hyphens (-), and un-
derscores (_).
–
Printing Service Name: Specify the printing service name. Up to 12
alphanumeric characters can be used, excluding the following
characters.
Spaces, backslashes (\), and commas (,).
–
WorkGroup Name:Specify the work group name. Up to 15 alphanu-
meric characters can be used, excluding the following characters.
\ * + = | : ; " ? < > ,.
5
To apply the settings, restart this machine (turn the main power off,
then on again).
Reminder
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
200/250/350
3
3-11