Center Staple And Fold; Hole Punching - Konica Minolta BIZHUB 350 User Manual

6

Center Staple and Fold

You can fold and staple printouts in half.
1
Click the Layout tab.
2
From the "Center Staple and Fold" drop-down list, select "Center Sta-
ple and Fold".
Note
The Center Staple and Fold function is only available when the optional
finisher and saddle kit are installed.

Hole punching

Holes can be punched into the printed document.
The hole punch function is available only when punch unit is installed on op-
tional finisher.
1
Click the Layout tab.
2
From the "Hole-Punch" drop-down list, specify the number of punched
holes.
Note
Depending on the selected Binding Position setting, different hole punch-
ing positions are available.
6-16
Setting up the PostScript driver (Windows)
200/250/350