Advertisement
5. Remove the locking tape and the protection mate-
rial from the connector and casters, and the notice
on how to bring the machine down onto the floor.
(Casters are also at both sides in front.)
Locking tapes
Notice on how to bring the
machine down onto the floor
6. Remove the locking tapes and the protection
materials from the handcart.
Protection materials
Locking tapes
7. Align the stacker tray included in the package to
the pins of the handcart, and install it.
Align to pins
of the handcart
Protection material
Caster locking
tape (also at both
sides in front)
15ATIXC009CB
Locking tapes
A0H1IXC002CA
Stacker tray
A0H1IXC003CA
E-3
V. Installation Procedure
Installation procedure for
[LS-505 + RU-504 + COLOR MFP 65ppm]
*
For the installation procedure for the RU-504,
see the RU-504 installation manual.
1. Turn OFF the machine's Sub and Main power
switches, and unplug the power cord.
2. Install the machine installation plate/L (included in
the RU package) (TP screw M4x6: 4 pcs.:
included with the RU).
Machine installation plate/L
TP screws M4x6
3. Install the blindfold plate (included in the RU
package) (TP screw M4x6: 2 pcs.: included with
the RU).
Blindfold plate
TP screws M4x6
4. Align the bottom hole of the LS-505 with the posi-
tioning pin on the power supply unit, and lock
them by sliding the LS-505 toward the back.
LS-505
Pin
Hole position
15ATIXE027SA
15ATIXE028SA
RU
15ATIXE029SB
Advertisement
