Graphics Tab; Device Options Tab - Konica Minolta BIZHUB 350 User Manual

7

Graphics tab

Item
Resolution
Halftone
Special
Scaling

Device Options tab

To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click "Properties" in the menu that appeared.
Item
Collate
Offset
Binding Position
Duplex
Combination
Staple
Hole-Punch
Center Staple and Fold
Front Cover Page
Back Cover Page
Paper Tray (Cover Page)
Transparence Interleave
Paper Tray
(Transparence Interleave)
Wait Mode
You can specify the following options by right-clicking the printer icon in the
Printers window, then clicking "Properties".
Item
Available printer memory
Installable options
7-2
Setting up the PPD driver (Windows)
Function
Specifies the print resolution.
Specifies the halftone number of lines and the pattern angle.
Prints a negative or mirror image.
Specifies the enlargement and reduction ratio.
Function
Specifies whether to print multiple copies in sets.
When printing multiple copies, shifts the output position of each
set.
Specifies the binding position.
Specifies duplex printing.
Specifies booklet printing.
Performs stapling.
Performs hole punching.
Folds the printouts in half and staples.
Attaches a front cover page.
Attaches a back cover page.
Selects the input tray for the front cover page and back cover
page.
Inserts interleaves between overhead projector transparencies.
Selects the input tray for the transparency interleaves.
Stops printing temporarily after part of the document has been
printed so that the proof print can be checked.
Function
Specifies the memory installed on this machine.
Specifies the options installed on this machine.
200/250/350