Program Default - Konica Minolta bizhub C450 Network Scanner Operations

Specifying settings from the control panel

Program default

The default screen that appears in the Program tab in Scan mode can be
specified. (Default setting: PAGE1)
1
In the User Setting screen, touch [2 Display Setting].
– To display the User Setting screen, refer to page 4-8.
2
Touch [2 Scan Basic Screen Default Setting].
3
Touch [Program Default].
4
Touch the button for the desired setting.
– Touch [
screen.
5
Touch [OK].
bizhub C450 (Phase3)
] or [ ], and then touch the button for the desired
4
4-35