Master Tuning; Key Scaling - Technics SX-KN2400 Operating Instructions Manual

13_Part VIII.fm 152 ページ ２００３年２月５日 水曜日 午後１時５１分
Part VIII

Master Tuning

This setting is used to fine-tune the pitch of the entire instrument. This is convenient when the Keyboard is
played with other instruments or with a recorded performance.
1.
On the SOUND MENU display, select
MASTER TUNING.
• The display changes to the following.
∧ ∨
2.
Use the and buttons to adjust the pitch.

Key Scaling

For each part you can change the tuning of each key within a one-octave range. In addition to equal tem-
perament tuning, you can perform in other types of scales, for example Arabic tuning.
1.
On the SOUND MENU display, select KEY
SCALING.
• The display looks similar to the following.
2.
Press the OCTAVE TUNING TEMPLATE but-
ton.
• The display looks similar to the following.
∧
3.
Use the PART and
part to set.
• If ALL is selected, all the parts are set at once.
152
QQTG0692
∨
buttons to select the
∧ ∨
4.
Use the TYPE and
type of tuning.
• Select from FLAT, WERCKMEISTER, KIRN-
BERGER, ARABIC 1 to 5, SLENDRO, and
PELOG.
∧ ∨
5.
Use the SHIFT and
key to perform in.
6.
Repeat steps 3 to 5 for each part, as neces-
sary.
7.
Press the SET button.
• The OCTAVE TUNING for the specified type
and key is automatically set.
I I I I Settings for each key.
On the KEY SCALING display, you can adjust
the tuning for each key.
After selecting a key with the KEY SELECT
and buttons, the pitch can be adjusted using
∧ ∨
the TUNING and buttons.
• The pitch can be raised or lowered by a maxi-
mum of one half-tone.
• You can use the PART SELECT
tons to switch the part.
• Use the ALL PARTS INITIAL button to return
all parts to the flat tuning.
Sound
buttons to select the
buttons to select the
∧ ∨
and but-