Song Select; Punch Record - Technics SX-KN2400 Operating Instructions Manual

09_Part IV.fm 84 ページ ２００３年２月５日 水曜日 午後１時３４分
Part IV

Song Select

You can select a desired song from the list of recorded songs.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
SONG SELECT.
• The display looks similar to the following.

Punch Record

If you make a playing error during REALTIME RECORD or would like to change the recording for some
other reason, you can use the punch recording feature to correct a selected portion of the performance
without having to redo the whole part.
Recording the performance
1.
On the SEQ MENU display, use the SONG
∧ ∨
SELECT and
number. Then select RECORD & EDIT.
2.
On the RECORD & EDIT display, select
PUNCH RECORD.
• The display looks similar to the following.
84
QQTG0692
Playback
buttons to select the song
Use the SONG SELECT L and M buttons to
3.
select a song.
• The total amount of memory used for the cur-
rent song is shown as a percentage (%) to the
right of the song name.
• If the NAMING button is pressed, the NAMING
display appears.
• To optimize memory, songs you do not wish to
preserve should be deleted. (Refer to page
93.)
Playing error
Punch in
Replay this portion
Recording mode
3.
Select the track which contains the portion you
want to correct.
• You cannot select a track in which no data is
stored.
• On the display "REC" indicates tracks which
are being recorded, and "PLAY" indicates
tracks which are being played back.
∧
4.
Use the MEAS
beginning measure of playback.
• "MEASURE=" indicates the current measure
number.
5.
Press the START/STOP button to begin play-
back of the specified track.
Sequencer
Punch out
∨
and buttons to specify the