Digital Drawbar - Technics SX-KN2400 Operating Instructions Manual

06_Part I.fm 37 ページ ２００３年２月５日 水曜日 午後２時３８分
Part I
SOUND EXPLORER
This is a convenient feature for finding the sound
you want from the many available sounds.
1.
In the PART SELECT section, choose RIGHT
1, RIGHT 2 or LEFT.
2.
Press the SOUND EXPLORER button to turn
it on..

Digital Drawbar

You can play organ sounds while controlling the drawbars on the display.
1.
In the PART SELECT section, select a part.
2.
Press the DIGITAL DRAWBAR button to turn
it on.
DIGITAL DRAWBAR
• The display looks similar to the following.
3.
Use the balance buttons below the display to
adjust the volume of each drawbar.
• The volume of each drawbar is illustrated on
the display and changes when you press the
SOUND
EXPLORER
∧ ∨
3.
Use the GRP and
GROUP of sound.
4.
Use the buttons on both side of the display to
select the sound.
• The numerical value that is displayed for each
sound is the MIDI [BANK MSB, LSB]-PRO-
GRAM CHANGE number.
• GM2 sounds are selected on this display.
ALPHABET
Press the CTG button to show the sound names
in alphabetical order.
• Press the ALP button to return to the CATE-
GORY display.
corresponding balance buttons to adjust the
volume.
• The DIGITAL DRAWBAR can not be selected
for the ACCOMP and BASS parts of the
COMPOSER, SOUND ARRANGER or PER-
FORMANCE PADS.
<DRAWBAR SETTING>
Press the DRAWBAR SETTING button.
(Continued on the next page)
Sounds and effects
buttons to select a
37
QQTG0692