Song Clear; Track Clear - Technics SX-KN2400 Operating Instructions Manual

09_Part IV.fm 93 ページ ２００３年２月５日 水曜日 午後１時３４分
Part IV

Song Clear

Erase the recorded contents of all tracks.
1.
On tne SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, selct SONG
CLEAR.
• The display looks similar to the following.
3.
Use the SONG No./ALL
specify the number of the song to erase.
• The data size (KB) and the total amount of
SEQUENCER memory or current song mem-
ory used is shown as a percentage (%) to the
right of the song name.
• If ALL is selected, all the songs recorded in
the SEQUENCER will be erased.

Track Clear

Erase the contents of a specific track.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
TRACK CLEAR.
• The display looks similar to the following.
3.
Use the balance buttons to select the track or
tracks you wish to clear.
• A "CLR" mark is shown for the selected tracks.
∧ ∨
and buttons to
4.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• If the YES button is pressed, "COMPLETED!"
appears on the display, the specified songs
are erased.
4.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• If the YES button is pressed, the specified
tracks are erased.
Sequencer
93
QQTG0692