Auto Play Chord - Technics SX-KN2400 Operating Instructions Manual

10_Part V.fm 111 ページ ２００３年１月２７日 月曜日 午後１時４５分
Part V
Playback
1.
In the RHYTHM GROUP section, press the
MEMORY button.
RHYTHM GROUP
POP ROCK DANCE POP BALLAD
SIMPLE DANCE
BEAT CLUB
JAZZ & BALLROOM
SWING & SHOW
Step Record
Use STEP RECORD to store the notes one-by-one on the display. This is a convenient way to store com-
plicated patterns that are difficult to play.
Recording procedure
1.
While you are recording, press the STEP
RECORD button.
• The display changes to the STEP RECORD
display similar to the following.
2.
Use the CURSOR buttons to move the cursor
to the note position you are going to store.
• Each dot represents one-eighth of a quarter-
note (a thirty-second note).
• When storing triplets, it may not be possible to
match the timing exactly with the 1/32-note
steps. However, if you select triplet-type notes
for the note length (LENGTH) in step 4 below,
the timing is automatically corrected.
TRAD &
USA WALTZ
LATIN &
WORLD MEMORY
LOAD
• The display looks similar to the following.
2.
Select the desired memory (A/B/C).
3.
Use the VARIATION buttons to select a varia-
tion.
4.
Press the START/STOP button.
• The DRUMS part begins to play back.
• The BASS and ACCOMP parts are played
back when you use the AUTO PLAY CHORD.
3.
Use the PAGE button to access the PAGE 2/2
display.
4.
Use the left LENGTH buttons to specify the
note value. Select from
r
× 2 to 4. (A 3 denotes a triplet-type
, ,
h w w
note.)
• For note values other than these, use the right
LENGTH buttons to specify the note value to
be added to that which you specified with the
left buttons.
Example: To record a dotted quarter-note (
+
q e
(Continued on the next page)
Composer
, , , , , , , ,
3 3 3 3
r x x e e q q
.)
q
111
QQTG0692