Copy And Paste The Recorded Data - Technics SX-KN2400 Operating Instructions Manual

Technics audio keyboard
Hide thumbs Also See for SX-KN2400:
Table of Contents

Advertisement

09_Part IV.fm 97 ページ 2003年2月5日 水曜日 午後1時34分
Part IV

Copy and paste the recorded data

You can copy and paste specific portions of the recorded data.
Select the function
1.
On the SEQ MENU display, use the SONG
SELECT
and
buttons to select the number
of the song. Then select COPY & PASTE.
• The display looks similar to the following.
2.
On the COPY & PASTE display, select a func-
tion.
3.
Perform the editing procedures. (See below.)
• During the editing procedure, if the indicator
for the TEMPO/PROGRAM is lit, you can use
the TEMPO/PROGRAM for the editing func-
tion.
SONG COPY
Copy all the recording data of a song to a spe-
cific song memory.
1.
On the FROM side, use the SONG
buttons to select the song number you wish to
copy from.
2.
On the TO side, use the SONG
tons to select the song number to copy to.
3.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
TRACK COPY
Copy the recorded data from specific tracks of a
song.
1.
Specify the track you wish to copy from.
• On the FROM side, use the SONG
buttons and TRACK
ify a track.
• If ALL is selected, all the tracks of the speci-
fied song number will be copied.
2.
Specify the track you wish to copy to (TO
side).
3.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
• The track assignment settings are also copied.
Note that in some cases, the CONTROL,
RHYTHM and CHORD part data in the desti-
nation tracks may be lost.
and
and
but-
Sequencer
and
and
buttons to spec-
97
QQTG0692

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-kn2600

Table of Contents