Print Area; Auto Tray Switch Feature - Konica Minolta BIZHUB C252P User Manual

Hide thumbs Also See for BIZHUB C252P:

Table of Contents

Loading copy paper

Print area

Any part of the image within the area indicated below is not copied.

- A margin 4.2 mm from the leading edge of the paper (A)

- A margin 4.2 mm from the trailing edge of the paper (B)

- A margin 4.2 mm on both sides of the paper (C)

If the selected paper tray runs out of paper while a job is being printed and a

different paper tray is loaded with paper meeting the following conditions,

the other paper tray is automatically selected so printing can continue. If the

optional LCT is installed, a maximum of 3,400 pages (with A4 v paper) can

be made continuously. (The paper tray is automatically switched only if the

"Auto Tray Switch ON/OFF" parameter in the Utility mode is set to "Allow".)

Operating conditions

- The paper is the same size.

- The paper is positioned in the same orientation.

- The paper is the same type.

- Paper trays that are selected when the paper tray is automatically

For details on the specifying the paper trays that are selected when the

paper tray is automatically switched, refer to "User Setting" on

bizhub C252P