Tray Setting - Konica Minolta BIZHUB C252P User Manual

Control panel settings

Tray Setting

Parameters
Auto Tray Select
Tray Priority
Auto Tray Select
No Match. Paper
Output Setting
Parameters
Print Output
Exit Tray Set
Offset Setting
Bin Setting
bizhub C252P
Description
Specify the paper trays that are selected
when the paper tray is automatically
changed.
Specify the priority for selecting the paper
trays when the automatic paper-tray-switch-
ing operation is performed.
Select whether or not a paper tray loaded
with paper of the same size is selected auto-
matically when the paper tray becomes emp-
ty.
Select the operation that is performed when
there is no paper of the corresponding size in
the specified paper tray.
• Stop Printing: The machine stops operat-
ing.
• Switch Trays: The specified paper trays
are selected in the specified order of prior-
ity and, when the tray runs out of paper,
the next paper tray is selected.
Description
Select whether the machine waits until the
first page of a print job is received before
starting to print or whether the machine waits
until all data is received before starting to
print.
Specify the priority for using the output trays
of the finisher.
Select whether or not printed papers are fed
out shifted when "Offset" is selected while a
finisher is installed.
• [ON]: Pages are fed out shifted.
• [OFF]: Pages are fed out without being
shifted.
The output tray 1 can be specified as mailbin
5 and the optional output tray can be speci-
fied as mailbin 6.
5
Initial Setting
T1, T2, T3, T4, BP
T1, T2, T3, T4, BP
Permit
Stop Printing
Initial Setting
Page Print
Main Tray
ON
Disable
5-35