Stapling; Hole Punching - Konica Minolta BIZHUB C252P User Manual

Specifying printer driver settings

Stapling

Multiple-page documents can be stapled.
1
Click the Setup tab.
2
Select the "Staple" check box.
3
From the drop-down list, select the number of staples and the stapling
position.
Note
The staple function is available only when the optional Finisher is
installed.
Note
Depending on the selected Binding Position setting, different stapling
positions are available.
The number of staples that can be selected varies depending on the
finisher that is installed.
When optional finisher FS-501 is installed, "1 staple" can be set. When
optional finisher FS-603 or FS-514 is installed, "1 staple" or "2 staples"
can be set.

Hole punching

Holes can be punched into the printed document.
1
Click the Setup tab.
2
Select the "Hole-Punch" check box.
3
From the drop-down list, select "4 Holes" as the number of punched
holes.
Note
The hole punch function is available only when optional finisher FS-603
and punch kit PK-501 are installed or when optional finisher FS-514 and
punch kit PK-510 are installed.
bizhub C252P
4
4-21