Table of Contents
Advertisement
Specifying printer driver settings
Note
To automatically register the installed options in the "Option" list, click
the [Gather Option Information] button when connected to the machine.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select "Bin Setting"
from "User Setting" — "Output Setting" on the control panel.
If "Printer" is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.
bizhub C252P
4
4-81
Advertisement
Table of Contents
Troubleshooting
