Copying Using Special Paper (Multi-Sheet Bypass Tray); Finisher - Konica Minolta 7255 Instruction Manual

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Use the Multi-sheet bypass tray to copy using special (non-standard) paper.
Specify the paper type and size to be loaded on the Multi-sheet bypass tray,
as described below.
When loading special paper in the main body tray or in the LCT to use it
on a regular basis, the paper type and size should be specified in the
Key Operator setting. See p. 13-23 to p. 13-24.
1.
Open the Multi-sheet bypass tray, and load the copy paper.
See p. 2-30 for further details.
2.
Touch the Bypass key to highlight it.
The PAPER TYPE/SIZE key will appear above the Bypass key. APS will be
deselected, and AMS will be highlighted on the Basic Screen.
3.
Touch PAPER TYPE/SIZE.
The Paper Type/Size popup menu will be displayed.
4.
Touch the desired paper type key.
When THICK, THIN, Tab paper, OHP, Trac'g, or User is highlighted, a print
job will conform to the selected paper type.
If no paper type indication is needed, touch the highlighted key to clear the
selection in the TYPE area.
The selection will be reflected on the Basic Screen when restored.
HINT
HINT
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without

Finisher

Finisher
Output Mode
Shift Tray
Output Mode
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-29