Changing Audio Quality/Sound Field; Setting The Sound Effects; Setting The Volume Balance - Panasonic SC-PTX7 Operating Instructions Manual

Changing audio quality/sound field

≥The following sound effects may not be available or
have no effect with some sources, or when
headphones are used (➜ page 80).
≥You may experience a reduction in sound quality when
these sound effects are used with some sources. If
this occurs, turn the sound effects off.

Setting the sound effects

By changing the settings, you can enjoy various audio
quality.
1
Press [SOUND].
Each time the button is pressed, it switches as shown
below.
[EQ]
v
[H.BASS]
v
[SW.LEVEL]
v
[RMTR]
∫ To change the sound quality
2
When "EQ" is selected, press [SELECT].
Each time the button is pressed, it switches as shown
below.
[HEAVY]
v
[CLEAR]
v
[SOFT]
v
[MANUAL]
v
[FLAT]
To manually set the equalizer
1 When "MANUAL" is selected, press [2] or [1].
Press and "
[2]
Press and "
[1]
2 When "BASS" or "TREBLE" is displayed, press
[3 4] to adjust the level.
∫ To switch H.BASS between ON/OFF
2
When "H.BASS" is selected, press [SELECT].
ON
(factory preset
for [DVD-V] only)
76
(factory preset)
(using for "Music Collection" only)
Good for rock music, etc. Gives
the music a punchy, louder sound.
Good for Jazz, etc. Gives crisp
treble.
A good setting for background
music
When manually setting the
equalizer (➜ below)
No effect (Off) (factory preset)
" is displayed.
BASS
PL PRG DISC SFC TG HDMI D.MIX MONO SLP ST CT
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
" is displayed.
TREBLE
PL PRG DISC SFC TG HDMI D.MIX MONO SLP ST CT
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
!""""#
OFF
(factory preset)
∫ To switch the subwoofer level
2
When "SW.LEVEL" is selected, press [SELECT].
Each time the button is pressed, it switches as shown
below.
[SUB W 2]
v
[SUB W 3]
v
[SUB W 4]
v
[SUB W 1]
∫ To switch "RMTR
2
When "RMTR" is selected, press [SELECT].
ON
≥"RMTR" will only work with compressed tracks on the
HDD (recorded AAC tracks or WMA/MP3 tracks
imported from a PC).
§ RMTR (Digital Re-master)
You can regenerate signal frequency lost during
compression, restoring the sound to near pre-
compression form.

Setting the volume balance

By changing these settings, you can make adjustments
to the speaker volume.
1
Press [CH SELECT].
Each time the button is pressed, it switches as shown
below.
[BALANCE FL/FR (L, R)]
:
;
[TRIM SW (SW ch)]
≥At the time of purchase this is set to "0 dB".
SRD E.
HDCD
H.BASS ≥When the playback source is 2 ch, only the
PGM
W
2
balance settings can be operated.
∫ To change the front speaker volume
SRD E.
HDCD balance
H.BASS
PGM
W
2
2
When [BALANCE FL/FR (L, R)] is selected,
press [2 1].
The settings for the volume balance of the front
speakers (L , R) changes (0 to s12 dB).
≥When headphones are connected (➜ page 80)
the balance will return to 0 dB (center).
(factory preset)
(factory preset for [DVD-V] only)
(factory preset for "TV Audio" selector)
§
" between ON/OFF
!""""#
OFF
(factory preset)
You can set the balance
of the volume for the front
speakers (L, R).
You can adjust the trim
level of the subwoofer.
Center Mark
DISC SFC TG HDMI D.MIX MONO SLP ST CT
PL PRG
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
SRD E.
HDCD
H.BASS
PGM
W
2