Disc Handling Care; Unit Care - Panasonic SC-PTX7 Operating Instructions Manual

Disc handling care

∫ How to hold a disc
Do not touch the
recorded surface.
∫ Concerning non-cartridge discs
Be careful about scratches and dirt.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and
then wipe dry.

Unit care

The precision parts in this unit are readily affected
by the environment, especially temperature,
humidity, and dust. Cigarette smoke can also cause
the unit to break or malfunction.
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean
this unit.
≥Before using chemically treated cloth, carefully read
the instructions that came with the cloth.
Do not use commercially available lens cleaners as
they may cause malfunction. Cleaning of the lens is
generally not necessary although this depends on the
operating environment.
DO NOT
DO
DO NOT
DO
∫ Handling precautions
≥Do not attach labels or stickers to discs. (This may
cause disc warping and un-balanced rotation,
rendering it unusable.)
≥Write on the label side of the disc only with a soft, oil-
based felt pen. Do not use ballpoint pens or other hard
writing implements.
≥Do not use record cleaning sprays, benzine, thinner,
static electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not drop, stack, or impact discs. Do not place
objects on them.
≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers
or labels (rental discs, etc.).
–Discs that are badly warped or cracked.
–Irregularly shaped discs,
such as heart shapes.
≥Do not place in the following
areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
–Locations susceptible to significant difference in
temperature (condensation can occur).
≥To protect discs from scratches and dirt, return them
to their cases or cartridges when you are not using
them.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the
unit.
Before moving the unit, ensure the disc trays are
empty. Failure to do so will risk severely damaging
the discs and the unit.
NOTE
Do not obstruct the rear panel's internal cooling fan.
DO NOT
DO NOT
19