Selecting The Settings For The Scheduled Timer Recording You Want To Use - Panasonic SC-PTX7 Operating Instructions Manual

Selecting the settings for the scheduled
timer recording you want to use
You can use only the scheduled timer recording that you
want to use by switching only the desired scheduled
timer recording to "On" from the list of scheduled timer
recording settings.
After completing step 4 on the left column on page 78,
5
Press [3 4 2 1] to select the scheduled timer
recording that you want to use and press
[ENTER].
Selected scheduled timer recording day of the
week and starting time.
6
Select the operation you want to set.
1 Press [3 4] to select "Timer Setup" and
press [ENTER].
2 Press [3 4] to select "On" and press
[ENTER].
When you do not want to use the scheduled
settings, select "Off".
On : Use this scheduled timer recording
Off : Do not use this scheduled timer recording
(setting only)
Invalid (Overlap): This scheduled timer
s (Erase setting):Scheduled timer recording not
7
Press [RETURN].
The unit returns to the screen shown in step 5.
Repeat steps 5 to 7 and switch each scheduled
timer recording to "On" (or "Off").
8
Press [RETURN] several times.
The unit returns to the previous screen.
9
Press [Í] to turn off the power.
If the power is not turned off, the timer will not
operate.
To return to the previous screen
Press [RETURN].
To change settings of a scheduled timer recording
Select the number of the scheduled timer recording in
step 5 and set again.
REC Timer setting
REC1 On REC5 -(Erase Setting)
REC2 Off REC6 -(Erase Setting)
REC3 Off REC7 -(Erase Setting)
REC4 On
Day : SUN
Time : 14:00 - 14:25
Source : FM 100.90 MHz
View Details
RETURN
REC Timer 1 Status Setting
Please select.
On
Off
- (Erase setting)
ENTER
Cancel
recording conflicts or overlaps
with another scheduled timer
recording and cannot be used.
yet set.
NOTE
≥Only radio and externally connected devices can
be recorded with the scheduled timer recording
function. You cannot record from a CD or
"OPTION" either with this function.
≥To avoid cutting off the beginning of the track that
is recording, the recording will begin a few
seconds before the set day of the week and time.
(While recording, "FREC" and the number of the
scheduled timer recording will flash on the
television.)
≥All scheduled timer recordings will operate on the
specified day of the week and time, except for
scheduled timer recordings indicated as "Off".
≥If the starting time for the scheduled timer
recording occurs at the same time as another
scheduled timer recording finishes, the second
recording may start late.
TIPS
When a scheduled timer recording overlaps
with another scheduled timer recording
You cannot record when a scheduled timer
recording overlaps with another scheduled timer
recording. When a timer is activated by selecting
"On", other timers that overlap with this scheduled
recording will then be set to "Invalid (Overlap)" and
cannot be used. If you want to activate a scheduled
timer recording that is currently set to "Invalid
(Overlap)", follow the steps in the left column to
switch the scheduled timer recording to "On".
To delete unnecessary scheduled timer
recording settings
After step 4 on the previous page
1 Press [3 4 2 1] to select unnecessary
scheduled timer recording settings and press
[ENTER].
2 Press [3 4] to select "Timer Setup" and press
[ENTER].
3 Press [3 4] to select "s (Erase setting)" and
press [ENTER].
To play after setting a timer
Even after setting a scheduled timer recording you
can play the unit as usual. However, after you finish
playing, be sure to set the unit to standby mode.
Scheduled timer recording will not record if the unit
is turned on.
≥Changing the volume and audio source will have
no effect on the details of the settings.
If a power failure, etc. caused timers to lose
their setting
The clock is reset, and you cannot enter the timer
recording screen.
Set the clock again (➜ page 17).
79