Changing Other Settings - Panasonic SC-PTX7 Operating Instructions Manual

Changing the settings

Changing other settings

1
Press [SETUP].
2
Press [3 4] to select "Other Setup" and press
[ENTER].
3
Press [3 4] to select the menu and press [1].
4
Press [3 4] to select the item and press
[ENTER].
5
Press [3 4 2 1] or numbered buttons to
make the settings and press [ENTER].
Other Setup
∫ "Remote Control" menu
([SETUP] ➜ "Other Setup" ➜ "Remote Control")
Remote Control
(➜ page 90)
∫ "Clock/Timer" menu
([SETUP] ➜ "Other Setup" ➜ "Clock/Timer")
Setting the Day and Time
(➜ page 17)
Timer Setup
( ➜ page 78)
∫ "Power On/Off " menu
([SETUP] ➜ "Other Setup" ➜ "Power On/Off")
Auto Power Off Mode
Power Off Mode
FL Dimmer
Change the brightness of the
unit's display.
∫ "TV Audio Input" menu
([SETUP] ➜ "Other Setup" ➜ "TV Audio Input")
TV Audio Input
TV audio can be switched
between analogue or digital
input.
88
Setup
Setup for Video
DVD
VIDEO
HDMI
DISPLAY
Other Setup Remote Control
Clock / Timer
Power On/Off
TV Audio Input
Network
Maintenance
ENTER
Main screen
≥Mode 1
≥Mode 2
Day
≥SUN ≥MON ≥TUE
Adjusting Time
Automatically turns the unit on and records specified audio at a specified time
and date.
≥Off
≥On: When the selector is set to "DVD/CD", "Music Collection" or "USB", the unit
switches to standby mode after about 10 minutes in the stop mode.
≥Quick-Start Mode
≥Power-Save Mode: When the unit is turned off, the amount of power consumed
–When this unit is in "Power-Save Mode", it may take more time to start
operating the unit once the unit is turned on. If you want to operate the unit
more quickly after turning the unit on, select "Quick-Start Mode".
–When you turn the unit off before the unit has finished conversion and analysis
(➜ page 26) of tracks, the unit will first enter standby in "Quick-Start Mode" for
two minutes, and then conversion and analysis will begin. Once conversion
and analysis is complete, the unit then enters "Power-Save Mode".
≥Bright
≥Dimmer
≥Auto: The display is dimmed, but brightens when you perform some operations.
≥TV:
Switches to analogue input (TV IN)
≥DIGITAL IN: Switches to digital input [OPTICAL IN (TV)]
–You cannot record from an external device when "TV Audio Input" is set to
"DIGITAL IN".
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
NOTE
≥There may be differences in operation methods.
If this happens, follow the on-screen instructions
for the operation.
≥The settings remain intact even if you switch the unit to
standby.
≥Underlined items are the factory settings in the
following table.
≥WED ≥THU ≥FRI
is reduced.
≥SAT