Changing Audio Quality/Sound Field; Setting The Sound Effects; Setting The Volume Balance - Panasonic SC-PTX7 Operating Instructions Manual

Changing audio quality/sound field

[Note]
≥The following sound effects may not be available or have no
effect with some sources, or when headphones are used
(➜ page 86).
≥You may experience a reduction in sound quality when these
sound effects are used with some sources. If this occurs, turn
the sound effects off.

Setting the sound effects

By changing the settings, you can enjoy various audio quality.
1
Press [SOUND].
Each time the button is pressed, it switches as shown below.
[EQ]
v
[H.BASS]
v
[SW.LEVEL]
v
[RMTR]
∫ To change the sound quality
2
When "EQ" is selected, press [SELECT].
Each time the button is pressed, it switches as shown below.
[HEAVY]
v
[CLEAR]
v
[SOFT]
v
[MANUAL] When manually setting the equalizer
v
[FLAT]
To manually set the equalizer
1 When "MANUAL" is selected, press [2] or [1].
Press [2] and "BASS" is displayed.
82
HDD BAND
SELECT SELECT
VOLUME
CANCEL
STOP PAUSE PLAY
MENU PLAYLIST FUNCTIONS
ENERGETIC MELLOW RELAXING EMOTIONAL
HDDREC CH SELECT FAVORITE 2 ND
REG SELECT
PLAYMODE FL DISPLAY SLEEP VS VS
SETUP SOUND SOUND SELECT SELECT MUTING
(factory preset)
(using for "Music Collection" only)
Good for rock music, etc. Gives the
music a punchy, louder sound.
Good for Jazz, etc. Gives crisp treble.
A good setting for background music
(➜ below)
No effect (Off) (factory preset)
PL PRG DISC SFC TG HDMI D.MIX MONO SLP ST CT
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
Press [1] and "TREBLE" is displayed.
2 When "BASS" or "TREBLE" is displayed, press [3 4]
to adjust the level.
∫ To switch H.BASS between ON/OFF
2
When "H.BASS" is selected, press [SELECT].
ON
(factory preset for [DVD-V] only)
∫ To switch the subwoofer level
2
When "SW.LEVEL" is selected, press [SELECT].
Each time the button is pressed, it switches as shown below.
[SUB W 2] (factory preset)
v
[SUB W 3]
v
[SUB W 4] (factory preset for [DVD-V] only)
v
[SUB W 1]
∫ To switch "RMTR
2
When "RMTR" is selected, press [SELECT].
ON
≥"RMTR" will only work with compressed tracks on the HDD
(recorded AAC tracks or WMA/MP3 tracks imported from a
PC).
§ RMTR (Digital Re-master)
You can regenerate signal frequency lost during
compression, restoring the sound to near pre-compression
form.

Setting the volume balance

By changing these settings, you can make adjustments to the
speaker volume.
1
Press [CH SELECT].
Each time the button is pressed, it switches as shown below.
[BALANCE FL/FR (L, R)] You can set the balance of
:
;
[TRIM SW (SW ch)]
≥At the time of purchase this is set to "0 dB".
≥When the playback source is 2 ch, only the balance
settings can be operated.
∫ To change the front speaker volume
SRD E.
HDCD
H.BASS
balance
PGM
W
2
2
When [BALANCE FL/FR (L, R)] is selected, press
[2 1].
PL PRG DISC SFC TG HDMI D.MIX MONO SLP ST CT
D DTS
MODE
CD
RDS
DVD
PTY PS A AC
!""""#
OFF
(factory preset)
§
" between ON/OFF
!""""#
OFF
(factory preset)
the volume for the front
speakers (L, R).
You can adjust the trim level
of the subwoofer.
SRD E.
HDCD
H.BASS
PGM
W
2