Playing Tracks Of Ipod With The Remote; Control For This Unit; Recording Tracks From Ipod To The Hdd; Volume - Panasonic SC-PTX7 Operating Instructions Manual

By inserting SH-PD10 (not included) into the OPTION
port and connecting iPod, you can play tracks (audio)
through this unit's speakers. Additionally, you can use
the remote control for this unit to perform operations
such as play, stop, and record
§
Only audio tracks can be recorded from iPod.
Preparation
1 Connect the SH-PD10 and iPod as shown on page
72.
2 Press [N SELECT O] to switch the selector to
"OPTION".

Playing tracks of iPod with the remote

control for this unit

By performing the following operations on the remote
control, you can play tracks from iPod.
1
PLAY
;, ∫
PAUSE
:9
SKIP
65
SEARCH
[r s VOLUME]
Volume adjust
≥Play will continue from the last track you were listening
to before connecting SH-PD10 and iPod.
§
operations on iPod.

Recording tracks from iPod to the HDD

You can record tracks from iPod to the HDD.
Press [¥ HDD REC].
Recording starts in the set recording mode (➜ below)
and playing of iPod also starts automatically.
To change the recording mode
1 Press [SUB MENU] while stopped.
2 Press [3 4] to select "Recording Mode"
(➜ page 27) and make changes.
In addition to the recording mode, you can also
change "Auto Track Divide" (➜ page 42), or "Auto
Synchro Level" (➜ page 42).
To stop partway through
Press [∫].
To return to the previous screen
Press .
[RETURN]
NOTE
≥If "No compatible equipment is connected" is
displayed, then no OPTION-compatible equipment
is connected to the OPTION port.
TIPS
To select a track you want to record
In "Playing tracks of iPod with the remote control for
this unit" (➜ left), operate the iPod, and press
[¥ HDD REC] after pausing at the beginning of the
track you want to record.
OPTION Sub Menu
Recording Mode LPCM
Auto Track Divide Manual
Auto Synchro Level Level0
ENTER
RETURN
73