Table of Contents
Advertisement
Other Settings
Play Speed (➜ page 54, Changing play speed)
∫ Play Menu
(Only when the elapsed play time can be displayed,
[JPEG] The Repeat function can be used.)
Repeat
(➜ page 54, Repeat play)
To repeat a specified section
A-B Repeat
Press [ENTER] at the starting and
Except
ending points.
[MPEG4]
Press [ENTER] again to cancel.
≥[DVD-VR] (still picture part): Does not
[DivX]
work.
Advanced
(➜ page 55, Reviewing titles/
Disc
programs to play)
Review
∫ Picture Menu
(➜ page 52, Adjusting the picture
Picture
Mode
quality)
With HDMI connection (When "Video
Mode" is set to "On") (➜ page 87,
"HDMI" menu)
Video recordings will be converted to,
and output as, high definition video.
The picture quality will vary depending
on the connected equipment. Choose
the picture quality to your preference.
480i/576i (interlace)
480p/576p (progressive)
720p (progressive)
1080i (interlace)
1080p (progressive)
≥"¢" will be displayed next to those
video outputs possible with the
connected equipment. Selecting an
Video
item without "¢" can result in the
Output
picture being distorted.
Mode
Should the picture be distorted, press
and hold [CANCEL] until the picture is
displayed correctly.
The setting will return to "480p/576p".
≥Output from the COMPONENT
VIDEO OUT terminal will be "480i/
576i".
With Other connections (When "Video
Mode" is set to "Off") (➜ page 87,
"HDMI" menu)
480i/576i (interlace)
480p/576p (progressive)
When you select "480p/576p" and a
confirmation screen appears, select
"Yes" only if connecting to a
progressive input compatible television.
Transfer
Mode
§
§
Source
Select
[DivX]
HD Picture
Enhancer
§
480i, 480p : When playing NTSC discs
576i, 576p : When playing PAL discs
§
§
If you have chosen "480p/576p", "720p",
"1080i" or "1080p" (➜ left), select the
method of conversion to suit the type of
material.
≥When the tray is opened, the setting
will return to Auto or Auto1.
When playing PAL discs, MPEG4 or
DivX video contents
Auto: Automatically detects the film and
video content, and appropriately
converts it.
Video: Select when using Auto, and the
content is distorted.
Film: Select this if the
edges of the film
content appear
jagged or rough
when Auto is
selected.
However, if the video content is
distorted as shown in the
illustration to the right, then select
Auto.
When playing NTSC discs
Auto1 (normal):Automatically detects
the film and video
content, and
appropriately converts it.
Auto2:In addition to Auto1,
automatically detects film
contents with different frame
rates and appropriately converts
it.
Video: Select when using Auto1 and
Auto2, and the content is
distorted.
When you select "Auto" the constructing
method of the DivX contents is
automatically distinguished and output. If
the picture is distorted, select "I
(Interlace)" or "P (Progressive)"
depending on which constructing
method was used when the contents
were recorded to disc.
Auto I (Interlace) P (Progressive)
With HDMI connection (When "Video
Mode" is set to "On") (➜ page 87,
"HDMI" menu)
Makes the quality of HDMI video output
(720p,1080i,1080p) sharp.
Off, 1 (weakest) to 3 (strongest)
(Continued on the next page)
57
Hide quick links:
Advertisement
Table of Contents
