Deactivating Do Not Disturb; Turning Call Waiting On And Off - Cisco SPA500 Series User Manual

Using Basic Phone Functions

Turning Call Waiting On and Off

STEP 1
STEP 2
STEP 3
STEP 4

Turning Call Waiting On and Off

Cisco Small Business Pro IP Phone SPA50X User Guide (SIP)
Using the Setup button:
You can also access Do Not Disturb by performing the following steps:
Press the Setup button and select Preferences > Do Not Disturb.
Press the edit softkey.
Press y/n to choose y, then press ok.
Press save.
Using the star code:
Enter *78 to activate Do Not Disturb.

Deactivating Do Not Disturb

Using the -dnd softkey:
To deactivate Do Not Disturb, press the -dnd softkey.
Using the Setup button:
You can also deactivate Do Not Disturb by pressing the Setup button and
selecting Preferences > Do Not Disturb.
Using the star code:
Enter *79 to deactivate Do Not Disturb.
Call waiting alerts you when you are on a call by ringing your phone and displaying
a status message that another call is ringing. If you turn call waiting off, incoming
calls do not ring your phone if you are on another call, and the caller hears a busy
signal or message.
You can also turn call waiting on and off from your PC using the IP Phone Web
Interface. See the "Configuring Call Waiting" section on page
3
69.
39