Dolphin 7200 Homebase Parts And Functions - Hand Held Products 7200/UG User Manual

N O T E
The Charging Main
Batt LED does not
indicate the battery
status of the Dolphin
terminal.
C H A P T E R 7 U S I N G

Dolphin 7200 HomeBase Parts and Functions

Dolphin Terminal
Well
Charging Main
Batt LED
Multi Serial
Port
COMM LED
Front Panel
The Dolphin's front panel has one slot:
You put the Dolphin in this well to communicate with a host
Dolphin Terminal Well
device and to charge the Dolphin's batteries.
There are three LEDs that you can use to monitor the status of battery charging
LEDs
and communications status:
1.
Charging Main Batt LED
properly seated into the Dolphin HomeBase.
2.
Indicates the status of data transfer between the Host Device and the
COMM LED
Dolphin Terminal as described below:
Comm LED
Red LED
Green LED
Orange LED
3.
Charging Aux Batt LED
Dolphin HomeBase as described in the table below:
T H E D O L P H I N 7 2 0 0
Figure 8 HomeBase Front Panel
Turns solid green when the Dolphin Terminal is
Description
Data is being sent from the Host Device
to the Dolphin HomeBase.
Data is being sent from the Dolphin
HomeBase to the Host Device.
Data is being sent at high data rates.
Figure 9 Data Transfer States
Indicates the status of the auxiliary battery pack in the
95 95 95 95
H O M E B A S E
Main Serial
Port
Charging Aux
Batt LED