Back Panel - Hand Held Products 7200/UG User Manual

N O T E
The configuration
switches are checked at
power up. Changes in
the switch settings will
not be recognized until
power is turned off and
then back on.
C H A P T E R 7 U S I N G
Charging Aux Batt LED
OFF
Red
Blinking red LED
Blinking orange LED
Solid green LED

Back Panel

Configuration
Switches
There is an auxiliary battery well, two configuration switches, a discharge button, and a
power supply connector:
Auxiliary battery well
will always have a spare. The auxiliary battery well can also service your battery pack.
T H E D O L P H I N
Description
Battery pack not properly inserted into
the auxiliary battery well, or the
HomeBase has no power
Battery discharging
Charge cycle initializing
Battery charging at the maximum rate
Trickle charging; battery pack is ready for
use
Figure 10 Battery Charging States
Figure 11 Back Panel of HomeBase
Insert a battery into the well to charge a second battery and you
96 96
96 96
7 2 0 0 H O M E B A S E
Aux Battery Well
Service Aux
Batt Switch
Power Supply
Connector