Dolphin 7200 Homebase Parts And Functions; Front Panel - Hand Held Products Dolphin 7200 User Manual

Dolphin 7200 HomeBase Parts and Functions

Front Panel

Multi-Serial Port
Dolphin Terminal Well
LEDs
1. Charging Main Batt
2. COMM
3. Charging Aux Batt
8 - 2
Dolphin Terminal Well
Charging Main
Battery LED
You put the Dolphin in this well to communicate with a host device and to charge the Dolphin's
batteries.
There are three LEDs that you can use to monitor the status of battery charging and communications
status:
Turns solid green when the Dolphin terminal is properly seated into the Dolphin HomeBase. The
Charging Main Batt LED does not indicate the battery status of the Dolphin terminal.
Indicates the status of data transfer between the Host Device and the Dolphin terminal as described
below:
Comm LED Description
Data is being sent from the Host Device to the Dolphin HomeBase.
Red LED
Data is being sent from the Dolphin HomeBase to the Host Device.
Green LED
Data is being sent at high data rates.
Orange LED
Indicates the status of the auxiliary battery pack in the Dolphin HomeBase as described in the table
below:
Charging Aux Batt LED Description
OFF
Red
Blinking red LED
COMM Charging Aux
LED Battery LED
Battery pack not properly inserted into the auxiliary battery well, or
the HomeBase has no power
Battery discharging
Charge cycle initializing
Main Serial Port
Dolphin® 7200 User's Guide