Answering system operation
Remote access
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19.
1.
Dial your telephone number from any touch-tone telephone.
2.
Enter the two-digit security code after the announcement and the
long beep.
3.
The system announces, "Press star for reminder or press pound to
listen to messages." Press
•
After pressing
remote commands:
Command
1
2
3
4
-OR-
•
After pressing
remote commands.
Command
1
2
3
33
4
5
*5
6
*7
8
0
, you can enter one of the following
Function
Review reminders.
Set reminders.
End the call.
Turn reminder off.
#
, you can enter one of the following
Function
Play all messages.
Play new messages.
Delete the current message (during playback).
Delete all old messages.
Repeat the current message (during playback).
Stop.
Hear a list of remote commands.
Skip to the next message (during playback).
Record a new announcement.
End the call.
Turn the answering system on or off.
#
or
.
58