Answering System Settings; Answering System; Announcement; Record Your Own Announcement - VTech CareLine SN1157 User Manual

Answering system settings

Answering system

Use the answering system menu of a cordless handset or telephone
base to turn on or off the answering system or message alert tone, set
up the announcement message, activate the call screening, or change
the number of rings, remote access code and message recording time.

Announcement

The telephone is preset with a greeting that answers calls with,
"Hello. Please leave a message after the tone." You can use this
preset announcement, or replace it with your

Record your own announcement

You can record an announcement up to 90 seconds, but any
announcement shorter than two seconds will not be recorded.
To record an announcement with a cordless handset:
Press MENU when idle.
1.
Scroll to Answering sys, then press SELECT.
2.
Press SELECT again to select Announcement.
3.
Press SELECT again to select Record annc. The system announces,
4.
"Record after the tone. Press 5 when you are done." After the tone,
speak towards the microphone.
Press 5 when done.
5.
To record an announcement with
1. Press MENU when idle, then press
SELECT
2. Press
SELECT
3. Press
announces, "Record after the tone. Press SAVE when you are done."
After the tone, speak towards the microphone.
SAVE
4. Press
again to select Announcement.
again to select Record new annc. The system
when done.
own.
the telephone base:
SELECT to select Answering system.
47