Table of Contents
Advertisement
Available languages
Available languages
Installation
Clearances
Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm)
countertop
height.
IMPORTANT:
If installing a range hood or microwave hood combination
above the range, follow the range hood or microwave hood
combination
installation instructions
for dimensional clearances above the cooktop surface.
Freestanding Ranges
A
G
F\
K
J
A. 18" (45.7 cm) upper cabinet to countertop
B. 13" (33.0 cm) upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum
clearance to top of the cooktop,
see NOTE.
E. 30" (76.2 cm) min. opening width
F. This shaded area recommended
for installation of rigid gas pipe.
G. 8" (20.3 cm) available area for gas and electric installation
H. This shaded area recommended
for installation of outlet or
junction
box.
I. 7" (17. 8 cm)
J. 11/2 '' (3.8 cm)
K. 41/2" (11.4 cm)
L. 5" (12. 7 cm) min. clearance from both sides of the range to the
side wall or other combustible
material.
M. Cabinet door or hinge should not extend into the cutout.
Slide-In Ranges
A. 18" (45.7 cm) upper cabinet to countertop
B. 13" (33.0 cm) max. upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum clearance to top of the cooktop, see NOTE.
E. 30" (76.2 cm) min. opening width
F. This shaded area recommended
for installation of rigid gas pipe.
G. 6" (15.2 cm) available area for gas and electric installation
H. This shaded area recommended
for installation of outlet or
junction box.
I. 7" (17.8 cm)
J. 11/2 '' (3.8 cm)
K. 41/2" (11.4 cm)
L. 5" (12. 7 cm) min. clearance from both sides of the range to the
side wall or other combustible
material.
M. 22 1_,, (58.3 cm) opening depth
N. 3/4"(1.9 cm) radius both corners
Q. Cabinet door or hinge should not extend into the cutout.
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.
6
Advertisement
Table of Contents
