Duplexing Document Feeder - Minolta EP2080 Operator's Manual

Duplexing Document Feeder

Remove the original stack from the
1
Document Feed Tray.
Swing open Document Feed Unit Door
2
F1 and gently pull out the original.
Holding down the Lock Release Key,
3
swing open Document Turnover/Exit
Unit Door F2 and carefully pull out
the original from the Exit Unit.
Close F2 .
4
4. When the Message "A paper misfeed has been detected." Appears
Raise the Duplexing Document Feeder.
5
Gently pull out the original from the
Document Turnover/Feed Unit.
Close F1 .
6
Remove the original from the Original
7
Glass and lower the Duplexing
Document Feeder.
Add the number of originals indicated
8
on the Touch Panel to the bottom of
the original stack removed in step 1,
and reload the stack onto the
Document Feed Tray.
119